For veteran content creators the amount of work to prepare perfect audio quality commentaries might be so difficult, that preparing an actual environment in which they can record perfect sound might take weeks. Purchasing an expensive microphone often ends up in huge disappointment, and even though it is a necessary step, it is hardly any work when it comes to making commentaries.
Keeping your microphone away from you will result in a horrible quality of sound, of course, unless your room is re-made into the small recording studio that holds sound completely inside. However, if you want to avoid sounding like your shouting from 'far far away' try to keep your mouth not further than 30 centimeters away from the. Reverb and Delay is also a really good way to make it sound as if the recording is being played in a room. A nice long delay will give that cool echo you might hear in those old recordings of big speeches. If you put the reverb/delay before the EQ, it can even emulate the sound of your 'lo-fi' microphone.
Throw the sound balance right out to one speaker. It was all mono-sound until the late 60s. New dj console mk2 driver for mac. Then cut the treble down to cut out the higher frequencies. Drop the bass but not too much. Hey everybody, I make RuneScape YouTube videos, the thing is that everyone teases me because I sound too young, (I'm 15). So could someone tell me how to change how I sound. And another thing, could someone tell me how to sound like TEHNOOBSHOW through the mic too.
We've provided several tips that will help you create the best quality commentaries for your videos. https://soft-bitcoin.mystrikingly.com/blog/kensington-displaylink-adapter-driver.
Starting from the simplest tips:
Make sure that your room is quiet!
This tip is, of course, obvious, but almost every new aspiring content creator does not abide by this rule. As a result, their videos are full of background noises. Thus, it is important to close the door and seal is as best as possible. Also, keep your windows closed to limit outside noise such as cars, talking people, wind etc. You can't imagine how well can a good microphone catch sounds from the outside.
How To Sound Old
Keep your microphone as close as possible (but still not too close)
Keeping your microphone away from you will result in a horrible quality of sound, of course, unless your room is re-made into the small recording studio that holds sound completely inside.
However, if you want to avoid sounding like your shouting from 'far far away' try to keep your mouth not further than 30 centimeters away from the microphone.
On the other hand, if you keep your microphone too close, your audio recording will contain sounds such as breathing and other sounds that are made with lips. Watch out to not do this as well. Alternatively, you may want to purchase a filter to mute those unwanted breathing sounds.
Don't record next to an open window or windy areas
If you do record and want to achieve the best possible sounds, make sure you close all your windows, and turn off all the fans you may have.
But what if you're recording outside?
There are a couple of ideas. For one – you may partially cover your microphone with your hand, but that's pretty uncomfortable. But don't cover it too much, or your recorded sound will be muffled. Your aim is to stop the wind from reaching your microphone.
But just how uncomfortable it is to hold my hand on my microphone for the entire time? Very…
For this reason, moviemakers often cover their microphones with so-called 'dead cats' that are meant to block any sound generated from wind blows. With a similar piece of equipment, you can cover your microphone and make sure that no wind is going to reach your microphone. You can purchase a pompom for just a few dollars, but if you don't want to pay money for a new microphone cover, just find some used up clothes, coat or a scarf.
Use proper audio recording software
Mic Sound Effects
Recording sound using built-in solutions on your phone or on your PC is usually a bad idea. The quality is low (even with great microphones) and usually, there are little to no features at all.
If you want to record sound in great quality, we suggest using Mirillis Action!. It has a lot of features and also allows you to record video of your screen or webcam as well. So if you're creating a podcast, think about adding your webcam to improve the overall quality of your recording.
Check the video below and discover how many features Action! has for recording audio:
Use audio/video editing software
Sometimes after recording you realize that something is still wrong with your audio. It has a lot of noise, or you realized that you recorded unintended sounds/lines etc. and want to get rid of them. Cutting redundant sections of your recording is possible with simple and completely free audio editing software Audacity.
Do tests before you start actual recording
Once you have everything set up, remember about testing things out before you do an actual recording. Perhaps you have forgotten to do something important that will, later on, show in the recording and you might end up regretting it a low. Let's try to avoid that every time!
The Blue Yeti USB Microphone is highly popular, but its sensitivity can overwhelm you. Photo (CC) by LTD Team How do you screenshot on a macbook pro.
The drawback to Yeti Blue USB Microphones for podcasting
Yeti Blue microphones are widely popular for podcasting and home sound recording. They do have a big drawback of being overly sensitive. They pick up too much background noise even when the gain is turned way down. I know because I bought one for my own podcasting and video streaming and had a hard time getting good sound with it.
The Wrong Advice
How To Make A Mic
Most of the advice I found online says to turn the gain knob on the Yeti down to the absolute minimum. That avoids picking up too much background sound, but then the audio is really quiet and almost unusable. The wrong advice says to amplify that sound at the computer or in your software. How to transfer photos.
The resulting sound I got using this advice was what I would describe as hollow.
The Contrarian Advice that Works Better
A few contrarians online say to turn the gain knob higher and turn down input level at the computer or software. That worked for me. The sound was much richer, and without picking up all the background noise.
The gain knob is the top one on the back of the Yeti. Most advice says turn it as far down as you can. That advice is wrong. Photo (CC) by LTD Team
- I plugged my best set of headphones directly into the Yeti so I could monitor the sound while I made adjustments.
- I turned the gain knob on the back of the Yeti all the way up. I could hear EVERYTHING.
- I opened the Windows Sound Settings by typing 'sound settings' into the Windows search box.
- In the Sound Settings, I scrolled down to the Input devices.
- I made sure the Yeti mic was selected, then clicked Device Properties.
- I adjusted the volume down to around 50.
Much better!
I adjusted the two settings a little bit each way, until my voice sounded the best I could get and I couldn't hear my wall clock ticking.
I ended up with the Yeti gain knob down about a quarter of the way and the Windows volume set at 75.
You don't have to do it every time
For veteran content creators the amount of work to prepare perfect audio quality commentaries might be so difficult, that preparing an actual environment in which they can record perfect sound might take weeks. Purchasing an expensive microphone often ends up in huge disappointment, and even though it is a necessary step, it is hardly any work when it comes to making commentaries.
Keeping your microphone away from you will result in a horrible quality of sound, of course, unless your room is re-made into the small recording studio that holds sound completely inside. However, if you want to avoid sounding like your shouting from 'far far away' try to keep your mouth not further than 30 centimeters away from the. Reverb and Delay is also a really good way to make it sound as if the recording is being played in a room. A nice long delay will give that cool echo you might hear in those old recordings of big speeches. If you put the reverb/delay before the EQ, it can even emulate the sound of your 'lo-fi' microphone.
Throw the sound balance right out to one speaker. It was all mono-sound until the late 60s. New dj console mk2 driver for mac. Then cut the treble down to cut out the higher frequencies. Drop the bass but not too much. Hey everybody, I make RuneScape YouTube videos, the thing is that everyone teases me because I sound too young, (I'm 15). So could someone tell me how to change how I sound. And another thing, could someone tell me how to sound like TEHNOOBSHOW through the mic too.
We've provided several tips that will help you create the best quality commentaries for your videos. https://soft-bitcoin.mystrikingly.com/blog/kensington-displaylink-adapter-driver.
Starting from the simplest tips:
Make sure that your room is quiet!
This tip is, of course, obvious, but almost every new aspiring content creator does not abide by this rule. As a result, their videos are full of background noises. Thus, it is important to close the door and seal is as best as possible. Also, keep your windows closed to limit outside noise such as cars, talking people, wind etc. You can't imagine how well can a good microphone catch sounds from the outside.
How To Sound Old
Keep your microphone as close as possible (but still not too close)
Keeping your microphone away from you will result in a horrible quality of sound, of course, unless your room is re-made into the small recording studio that holds sound completely inside.
However, if you want to avoid sounding like your shouting from 'far far away' try to keep your mouth not further than 30 centimeters away from the microphone.
On the other hand, if you keep your microphone too close, your audio recording will contain sounds such as breathing and other sounds that are made with lips. Watch out to not do this as well. Alternatively, you may want to purchase a filter to mute those unwanted breathing sounds.
Don't record next to an open window or windy areas
If you do record and want to achieve the best possible sounds, make sure you close all your windows, and turn off all the fans you may have.
But what if you're recording outside?
There are a couple of ideas. For one – you may partially cover your microphone with your hand, but that's pretty uncomfortable. But don't cover it too much, or your recorded sound will be muffled. Your aim is to stop the wind from reaching your microphone.
But just how uncomfortable it is to hold my hand on my microphone for the entire time? Very…
For this reason, moviemakers often cover their microphones with so-called 'dead cats' that are meant to block any sound generated from wind blows. With a similar piece of equipment, you can cover your microphone and make sure that no wind is going to reach your microphone. You can purchase a pompom for just a few dollars, but if you don't want to pay money for a new microphone cover, just find some used up clothes, coat or a scarf.
Use proper audio recording software
Mic Sound Effects
Recording sound using built-in solutions on your phone or on your PC is usually a bad idea. The quality is low (even with great microphones) and usually, there are little to no features at all.
If you want to record sound in great quality, we suggest using Mirillis Action!. It has a lot of features and also allows you to record video of your screen or webcam as well. So if you're creating a podcast, think about adding your webcam to improve the overall quality of your recording.
Check the video below and discover how many features Action! has for recording audio:
Use audio/video editing software
Sometimes after recording you realize that something is still wrong with your audio. It has a lot of noise, or you realized that you recorded unintended sounds/lines etc. and want to get rid of them. Cutting redundant sections of your recording is possible with simple and completely free audio editing software Audacity.
Do tests before you start actual recording
Once you have everything set up, remember about testing things out before you do an actual recording. Perhaps you have forgotten to do something important that will, later on, show in the recording and you might end up regretting it a low. Let's try to avoid that every time!
The Blue Yeti USB Microphone is highly popular, but its sensitivity can overwhelm you. Photo (CC) by LTD Team How do you screenshot on a macbook pro.
The drawback to Yeti Blue USB Microphones for podcasting
Yeti Blue microphones are widely popular for podcasting and home sound recording. They do have a big drawback of being overly sensitive. They pick up too much background noise even when the gain is turned way down. I know because I bought one for my own podcasting and video streaming and had a hard time getting good sound with it.
The Wrong Advice
How To Make A Mic
Most of the advice I found online says to turn the gain knob on the Yeti down to the absolute minimum. That avoids picking up too much background sound, but then the audio is really quiet and almost unusable. The wrong advice says to amplify that sound at the computer or in your software. How to transfer photos.
The resulting sound I got using this advice was what I would describe as hollow.
The Contrarian Advice that Works Better
A few contrarians online say to turn the gain knob higher and turn down input level at the computer or software. That worked for me. The sound was much richer, and without picking up all the background noise.
The gain knob is the top one on the back of the Yeti. Most advice says turn it as far down as you can. That advice is wrong. Photo (CC) by LTD Team
- I plugged my best set of headphones directly into the Yeti so I could monitor the sound while I made adjustments.
- I turned the gain knob on the back of the Yeti all the way up. I could hear EVERYTHING.
- I opened the Windows Sound Settings by typing 'sound settings' into the Windows search box.
- In the Sound Settings, I scrolled down to the Input devices.
- I made sure the Yeti mic was selected, then clicked Device Properties.
- I adjusted the volume down to around 50.
Much better!
I adjusted the two settings a little bit each way, until my voice sounded the best I could get and I couldn't hear my wall clock ticking.
I ended up with the Yeti gain knob down about a quarter of the way and the Windows volume set at 75.
You don't have to do it every time
I made these changes one time in Sound Settings, and now Windows seems to remember for me. Airport yosemite mac. Whenever I hook or plug in my Yeti, it's ready to go. I don't have to do anything extra.
New to SmallBizSurvival.com? Take the Guided Tour. Like what you see? Get our updates.
If you're interested in small town small business, feel free to check out some of our best stuff:
How To Use A Mic On Pc
- Zoom Towns: attracting and supporting remote workers in rural small towns- December 10, 2020
- In an economic crisis, spend your brainpower before your dollars- November 25, 2020
- Video: How to fill empty car dealership buildings for the holidays- November 6, 2020
- How has 2020 changed the challenges rural small towns face? Tell us here- October 20, 2020
- The Idea Friendly Method to surviving a business crisis- October 6, 2020
- Join me for the Rural Renewal Symposium online Oct 13- September 26, 2020
- Cheap placemaking idea: instant murals- September 11, 2020
- Refilling the rural business pipeline- July 7, 2020
- Huge vacant buildings: grants to renovate?- June 9, 2020
- Economic self defense for small towns - June 7, 2020
